| Category | Details |
|---|---|
| Laser System | Laser Count: Dual Laser Laser Type: Diode-Pumped Solid-State Laser (Nd:YVO₄) Wavelength: 354.7 nm Laser Power: 1000 / 2000 / 3000 mW (Optional per laser) |
| Recoating System | Method: Intelligent Positioning with Vacuum Adsorption Recoating Standard Layer Thickness: 0.1 mm Rapid Build Layer Thickness: 0.1 – 0.15 mm High-Precision Layer Thickness: 0.05 – 0.1 mm |
| Optical & Scanning System | Spot Size (Diameter @1/e²): 0.10 – 0.16 mm (Normal) Dynamic Zoom Range: 0.10 – 0.50 mm Galvanometer: High-Speed Scanning Galvanometer (Dual Galvanometers) Part Scanning Speed: 6.0 – 20.0 m/s (Recommended) Part Jump Speed: 20.0 – 40.0 m/s (Recommended) Reference Build Rate: 150 – 450 g/h (Super ×2) |
| Elevator System | Repeatability Accuracy: ±0.01 mm Lift Motor: High-Precision Servo Motor Base Platform: Marble Reference Platform |
| Resin Vat | Standard Capacity: Approx. 1170 Liters (@600mm Z-height) Build Volume: 1600 mm (X) × 800 mm (Y) × 600 mm (Z) Max Part Weight: 150 kg (@600mm Z-height) Heating Method: Precision Resistance Wire Heating Compatible Resins: ZR680 (Fine White), ZR710 (Tough White), ZR820 (High Transparency) |
| Software | Network: Ethernet, TCP/IP, IEEE802.3 Control Software: iSLA (ZERO 5.0) Pre-processing Software: 3dLayer File Formats: CLI, SLC, STL |
| Installation Conditions | Power Supply: 220V (±10%) AC, 50/60Hz, Single Phase, 5/17A Operating Temperature: 20 – 26°C Relative Humidity: < 40%, Non-condensing Machine Dimensions: 2.53m(W)×1.56m(D)×2.45m(H) (Excluding computer stand) Machine Weight: Approx. 2600 kg |
| Warranty | Laser Source: 5000 hours or 12 months (whichever comes first) Whole Machine: 12 months from installation date |
> Please note: Specifications are subject to change without notice. Contact a Forgecise representative for the most current technical data.
The iSLA1600D is the ultimate solution for industries demanding the largest possible build volumes in additive manufacturing. Designed for heavy-duty applications, this ultra-large industrial SLA 3D printer offers an unprecedented build envelope of 1600mm (X) × 800mm (Y) × 600mm (Z). This capacity allows for the single-piece printing of full-scale car bumpers, boat hull sections, wind tunnel models, and large architectural prototypes, eliminating the need for assembly and ensuring superior structural integrity. It also supports high-density nesting for mass production of smaller components.
At its core, the Forgecise iSLA1600D utilizes a powerful Diode-Pumped Solid-State Laser (Nd:YVO₄) system operating at 354.7nm. The dual-laser configuration features two independent high-speed galvanometers, supporting laser power options of 1000mW, 2000mW, or 3000mW per unit. This setup achieves exceptional scanning speeds of 6.0–20.0 m/s and jump speeds up to 40.0 m/s, delivering reference build rates of 150–450 g/h. The dynamic zoom optical system (spot size 0.10–0.50 mm) provides unmatched flexibility between speed and fine detail resolution.
- Extreme Precision & Stability: Weighing 2600kg, the machine is built on a massive, vibration-dampening frame with a marble reference platform and high-precision servo motors. This ensures a repeatability accuracy of ±0.01mm, critical for maintaining tight tolerances on parts exceeding one meter in length.
- Intelligent Recoating Technology: The proprietary Intelligent Positioning with Vacuum Adsorption Recoating system guarantees uniform resin distribution across the vast 1.6-meter build area. It supports versatile layer thicknesses: standard (0.1mm), rapid build (0.1–0.15mm), and high-precision (0.05–0.1mm).
- High-Capacity Resin Management: The integrated resin vat holds approximately 1170 liters of material, equipped with precision resistance wire heating to maintain optimal viscosity for consistent curing. It is fully compatible with Forgecise’s industrial photopolymers, including ZR680 (Fine White), ZR710 (Tough White), and ZR820 (High Transparency).
- Advanced Software Ecosystem: Managed by the Forgecise iSLA (ZERO 5.0) control software and supported by 3dLayer for preprocessing, the system ensures a seamless workflow via Ethernet connectivity, supporting standard file formats (STL, SLC, CLI).
Ideal for rapid prototyping, vacuum casting master patterns, and low-volume manufacturing of oversized parts, the Forgecise iSLA1600D sets the global benchmark for productivity and scale in ultra-large format resin 3D printing.
