Shouyu

Back to Parts Manufacturing Written by: Felix LeeCEO at Forgecise Last Updated: August 14, 2026 What Is Industrial Ultrasonic Cleaning Equipment? Industrial ultrasonic cleaning equipment is an automated cleaning system used to remove manufacturing residues from industrial parts. It uses ultrasonic vibration and filtration systems to clean contaminants such as metal chips, metal fragments, welding

Written by Felix LeeCEO at Forgecise Last Updated: August 10, 2026 How Are Metal 3D Printed Parts Checked Before Shipping? Metal 3D printed parts go through final inspection, testing, documentation review, traceability checks, and protective packaging before delivery. These steps confirm that each part meets design requirements, material standards, and customer expectations. A finished metal

Back to Parts Manufacturing Author: Felix Lee, CEO at ForgeciseLast Updated: August 10, 2026Reviewed by: Forgecise Engineering Team Metal 3D Printing Post Processing: CNC Machining, Finishing, and Hybrid Manufacturing Guide Quick Answer Metal 3D printing post processing includes machining, finishing, and inspection steps used after printing to achieve final part accuracy, surface quality, and functional

Back to Parts Manufacturing Author: Felix Lee, CEO at ForgecisePublished: August 10, 2026Category: Metal Additive Manufacturing | Quality Control Introduction: Why NDT Matters in Metal 3D Printing Non-destructive testing (NDT) is a key quality inspection process for metal 3D printing. It allows manufacturers to check parts without cutting, damaging, or destroying them. For aerospace, medical,

Back to Parts Manufacturing Author: Felix Lee, CEO at ForgecisePublished Date: August 10, 2026Category: Metal Additive Manufacturing / Post-Processing What Is Metal 3D Printing Sandblasting? Metal 3D printing sandblasting is a post-processing method that uses compressed air to spray abrasive particles onto printed metal parts. It removes loose powder, oxides, and surface defects while improving

Back to Parts Manufacturing Written by: Felix LeeCEO at Forgecise | Metal Additive Manufacturing & Industrial 3D Printing Solutions Published: August 2026Last Updated: August 2026 Quick Answer Water flow testing for metal 3D printing is a quality verification method that checks whether internal channels inside printed parts are open, clean, and built correctly. By measuring

Published Date: August 9, 2026Last Updated: August 9, 2026 Author Felix LeeCEO at Forgecise Felix Lee works with advanced manufacturing technologies, precision production processes, and industrial quality solutions. His experience includes helping manufacturers improve part cleanliness, production reliability, and process control for demanding applications. Technical Review:Forgecise Engineering Technology Team Ultrasonic cleaning is a non-contact cleaning

Back to Parts Manufacturing Written by:Felix LeeCEO at Forgecise Last Updated: August 2026 Metal additive manufacturing allows engineers to create parts with shapes that were difficult or impossible to make before. But printing the part is only one stage of the process. The next challenge is removing the support structures. Metal 3D printing support removal

Back to Parts Manufacturing Last Updated: August 2026 Author: Felix Lee, CEO at Forgecise Felix Lee is the CEO at Forgecise, focusing on advanced manufacturing solutions, industrial automation, and digital production systems. His work covers how manufacturers can improve production control, part identification, and quality management through connected manufacturing technologies. Quick Answer Laser marking for

Back to Parts Manufacturing Written by Felix Lee, CEO at ForgeciseLast Updated: August 2026 What Is Wire EDM Used for in Metal Additive Manufacturing? Wire EDM (Wire Electrical Discharge Machining, or WEDM) is a precision cutting method used after metal 3D printing to remove build plates, separate support structures, and cut accurate profiles. Unlike traditional